Washer Controls And Settings - Kenmore 417.6173 Series Use & Care Manual

Washer Operating Instructions
Steps Tips
9. Select • See Washer Cycle Selection and
washing
cycle and
• Unit will emit three short beeps to
settings for
each load.
10. Close the • See Washing Cycle Controls (Start,
washer lid
and start
• LED will light solid when washer is
the washer.
11. Remove
• For safety, the lid is locked during
items when
the cycle is
• Once cycle has ended, wash tub
completed.
• Place washed items in automatic
Safety Lid Lock

Washer Controls and Settings

Washing Setting Chart
These temperatures and water levels are available with the following cycles.
Water Temperature
Hot

Warm

Cold

Water Level
Max Fill

Med

Low 
 = Available selections.
See Washing Cycle Selection and Washing Cycle Settings on the following pages for a
detailed description of each setting.
Washer Cycle Settings .
indicate it is in "wake" mode and
ready to operate.
Pause, and Cancel) .
running.
the operation of the washer.
will come to a complete stop and
door lid safety lock will disengage
with an audible double click.
dryer, line dry, or dry flat as di-
rected by fabric care label. Excess
wrinkling, color transfer or odors
may develop in items left in the
washer after the cycle has ended.
 
  
  
  
  

 
= Factory presets.
Important
• For best results, follow
fabric care label on items to
be washed.
• Pausing a wash cycle while
washer is running may
affect performance of
the wash cycle.
• DO NOT force open the
locked lid. The wash tub can
take several minutes
to stop.
• For best results, follow
fabric care label on items to
be dried.
• For safety, the lid will remain
locked for 6 minutes after
the cycle ends.
  
  
  
  
  
 

10
 
 

 
  
  
 
