Dryer Controls And Settings; Dryer Operating Instructions - Kenmore 417.6173 Series Use & Care Manual

Hide thumbs Also See for 417.6173 Series:
Table of Contents

Advertisement

Dryer Operating Instructions

Drying Procedures (continued)
Steps
4. Select the
cycle and
settings for
each load.
5. Start the
dryer.
6. Remove items
when cycle is
completed.

Dryer Controls and Settings

Dryer Setting Chart
These temperatures and water levels are available with the following cycles.
Dry Temp (Temperature)
High
Normal
Low
= Available selections.
See Drying Cycle Selection and Drying Cycle Settings on the following pages for a
detailed description of each setting.
Tips
• See Drying Cycle Selection and Drying Cycle
Settings on the following pages.
• Over-drying can cause wrinkles, shrinkage, lint,
harshness, and build up of static electricity.
• If drying a single large or bulky item, such as
a comforter, remove the item part way through
the cycle and turn it "inside out" to maximize
drying effectiveness. Place item back in dryer
and re-start cycle.
• See Drying Cycle Controls (Start, Pause, and
Cancel) on the following pages.
• Immediately hang or fold when the load is
completed.
= Factory presets.
= Non-modifiable presets.
19
Important
• For best results,
follow fabric
care label on
items to be
dried.
• The dryer
WILL NOT
operate with
the door open .
• ALWAYS clean
filter after
each use.

Advertisement

Table of Contents
loading

This manual is also suitable for:

417.7173 series

Table of Contents