Features - Ryobi P120 Operator's Manual

18 volt dual port charger
Table of Contents

Advertisement

PRODUCT SPECIFICATIONS
Charger Voltage......................................................................................................................................................18 Volt DC
Charger Input ....................................................................................................................................... 120 V, 60 Hz, AC only
Charge Rate ..................................................................................................................................................................1 hour
Cord Length ......................................................................................................................................................................6 ft.
FULLY CHARGED
(GREEN LED)
KNOW YOUR CHARGER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
THERMAL PROTECTION
Your dual-port charger has a thermal protection system that
prevents charging batteries that are too hot, which could
cause damage to the battery and a loss of run-time.
LED DISPLAY
The LED lights located next to each battery port indicate the
charge status of each battery.

FEATURES

EVALUATING
(YELLOW / GREEN LED)
DUAL-PORT
CHARGER
QUICK CHARGE
(RED LED)
CORD WRAP
The power cord wraps neatly around the bottom of the
charger for convenience in storage and transportation.
"KEY HOLE" HANGING
The charger has a "key hole" hanging feature for convenient,
space-saving storage. Screws should be installed so the
center distances are 3 inches (76.2 mm) apart.
4
CORD WRAP
3 INCHES
(76.2 mm)
Fig. 1

Advertisement

Table of Contents
loading

Table of Contents