Sample Configurations - Russound CAM6.6T-S1 Instruction Manual

SAMPLE CONFIGURATIONS

MULTIPLE CONTROLLERS WITH ST2 DUAL TUNER
Sharing an ST2 Dual Tuner with multiple CAM6.6 con-
trollers (no built-in tuners)
The configuration below is suitable for 7 to 12 zones
that can all access the ST2 Dual Tuner. This configura-
tion uses RCA "Y" cables from the ST2 Tuner source
outputs to connect to both CAM6.6 source inputs.
CAM6.6 (no tuner installed) -
Controller Setup Menu: Controller ID = 1
Source Setup Menu: Basic Setup Procedure:
Source # = 1; Source Name = Tuner 1;
Command Type = Peripheral
Source # = 2; Source Name = Tuner 2;
Command Type = Peripheral
Output/Input Switch = Input
RCA cable connected from ST2 Tuner 1 audio output
106
L
OOP
ST2
Smart Tuner
A
NEWMARKET, NH U.S.A. NTENNA
FM C
OAX
RS-232 K P
LINK EYPAD ORTS
INTERFACE
I N O UT
UNO-S1 Keypads
102.5
102.5
102.5 102.5
to Source 1 input on CAM6.6 (1)
RCA cable connected from ST2 Tuner 2 audio output
to Source 2 input on CAM6.6 (1)
CAM6.6 (no tuner installed) -
Controller Setup Menu: Controller ID = 2
Source Setup Menu: Basic Setup Procedure:
Source # = 1; Source Name = Tuner 1;
Command Type = Peripheral
Source # = 2; Source Name = Tuner 2;
Command Type = Peripheral
Output/Input Switch = Input
RCA cable connected from ST2 Tuner 1 audio output
to Source 1 input on CAM6.6 (2)
RCA cable connected from ST2 Tuner 2 audio output
to Source 2 input on CAM6.6 (2)
ST2 Dual Tuner Back Panel
L
OOP
T UNER 2
A
NTENNA
FM C
A UDIO O UTPUT OAX
L R
IR IR
RCA "Y" Cable
RCA Cable
RCA Cable
CAM6.6 Back Panel
(Controller ID 1)
UNO-S1 Keypads
CAM6.6 Back Panel (Controller ID 2)
Serial#
T UNER 1
A UDIO O UTPUT
L R
12VDC 1.5A
CAM6.6
CAM6.6