The UNO-S1 Keypad uses a 110-punchdown
terminal to provide a simple installation and
strong connection for CAT-5 cable's eight con-
ductors. Punchdown terminals require the use of
a punchdown tool which has been provided with
the keypad kit. Attach the CAT-5 cable to the
110-punchdown terminal on the UNO-S1 Keypad
as shown, matching the conductor colors to the
connection color guide. The keypad will not
operate properly if the terminations deviate from
the required connection order.
110 PUNCHDOWN CONNECTOR - Termination for CAT-5 connection between the
UNO-S1 Keypad and the CAM6.6 controller.
UNO-S1 Keypad-CAT-5 Connection
Take care when using an impact 110 punchdown
tool, as this may overspread the contact points.
Use of the impact tool may propel stray bits of wire
and jacket into the keypad's chassis and possibly
cause a short in the circuitry. Gently shake or blow
air through the keypad chassis to remove stray wire
before the keypad is installed into the junction box.
, NH U.S.A.
System Control Keypad