Hardware; Tuner; Hdmi; Hdmi Cec (Rihd) - Onkyo TX-NR545 Manual

Advanced Settings (Setup Menu)
6. Hardware

Tuner

AM/FM Frequency Step (North American and Taiwanese models)
Default Value: 10kHz/0.2MHz
Select a frequency step depending on your area of residence.
Select "10kHz/0.2MHz" or "9kHz/0.05MHz".
When this setting is changed, all radio presets are deleted.
AM Frequency Step (European, Australian and Asian models)
Default Value: 9kHz
Select a frequency step depending on your area of residence.
Select "10kHz" or "9kHz".
When this setting is changed, all radio presets are deleted.

HDMI

HDMI CEC (RIHD)
Default Value: Off
Setting to "On" enables the input selection link and other link functions
with HDMI connected CEC compliant device.
"On": Use this function
"Off": Do not use this function
When changing this setting, turn off and then on again the power of all
connected components.
Depending on the TV set, a link may need to be configured on the
TV.
When this setting is "On", the names of the CEC­compatible
components and "CEC On" are displayed after this operation screen
is closed.
Power consumption in standby mode may increase if this setting is
"On". (Depending on the TV status, the unit will enter the normal
standby mode.)
If you operate the MASTER VOLUME control on the unit when this
setting is "On" and audio is output from the TV speakers, audio will