Onkyo TX-NR545 Manual page 84
Tuning into a radio station
Hide thumbs
Also See for TX-NR545:
- Basic manual (32 pages) ,
- User manual (32 pages) ,
- Service manual (131 pages)
Table of Contents
Advertisement
Center
Default Value: 0 dB
Select a value between "12 dB" and "+12 dB". A test tone will be
output each time you change the value. Select the desired level.
Front Right
Default Value: 0 dB
Select a value between "12 dB" and "+12 dB". A test tone will be
output each time you change the value. Select the desired level.
Height Left
Default Value: 0 dB
Select a value between "12 dB" and "+12 dB". A test tone will be
output each time you change the value. Select the desired level.
This setting cannot be changed if "Configuration" "Powered Zone
2" is set to "Yes" and Zone2 is set to on.
Height Right
Default Value: 0 dB
Select a value between "12 dB" and "+12 dB". A test tone will be
output each time you change the value. Select the desired level.
This setting cannot be changed if "Configuration" "Powered Zone
2" is set to "Yes" and Zone2 is set to on.
Surround Right
Default Value: 0 dB
Select a value between "12 dB" and "+12 dB". A test tone will be
output each time you change the value. Select the desired level.
Back Right
Default Value: 0 dB
Select a value between "12 dB" and "+12 dB". A test tone will be
output each time you change the value. Select the desired level.
This setting cannot be changed if "Configuration" "Powered Zone
2" is set to "Yes" and Zone2 is set to on.
Back Left
Default Value: 0 dB
Select a value between "12 dB" and "+12 dB". A test tone will be
output each time you change the value. Select the desired level.
This setting cannot be changed if "Configuration" "Powered Zone
Advertisement
Table of Contents
