Delmhorst Instrument Co G-34 Owner's Manual

Delmhorst Instrument Co G-34 Owner's Manual

Moisture detector for baled hops

Advertisement

MODEL G-34 MOISTURE DETECTOR FOR BALED HOPS

INTRODUCTION

Thank you for purchasing the Delmhorst model G-34 Moisture Detector. The G-
34 is a rugged, reliable instrument that enables you to easily check moisture
levels in baled hops to assure quality and safe storage. Features include:
 Easy-to-read analog display.
 Moisture Range: 7%-14%.
 Built-in battery and calibration check.
 Auto-shutoff timer to extend battery life.
 Sturdy plastic carrying case.
 2-9V batteries (included)
 1-year warranty on the meter, 90DD on all electrodes

OPERATION

1.
To check battery voltage, push the switch down to the "OFF" position and
hold. The batteries are OK if the needle moves beyond "11" (BATT OK").
The 9-volt batteries are located in the compartment on the case bottom.
2.
To check the meter calibration, push the switch to the "ON" position and
hold. The meter is in calibration if it reads "13.5" on the dial. A tolerance
of + 0.5 is acceptable. An optional external resistance standard (part
no.MCS-44) is also available. Please contact Delmhorst or your local
dealer to purchase.
To turn the meter on, push the switch to the "ON" position and release.
The meter remains on for 4 minutes. The auto-timer is reactivated for 4
minutes with each subsequent test with a reading of 8% or higher. If
readings are below 8%, push the switch "ON" from time to time to prevent
the meter from turning "OFF" automatically. The meter may be turned off
manually by pushing the switch to the "OFF" position. When the meter is
"ON", the needle rests below the 6% mark.
Find Quality Products Online at:
OWNER'S MANUAL
1
GlobalTestSupply
www.
.com
sales@GlobalTestSupply.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G-34 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Delmhorst Instrument Co G-34

  • Page 1 MODEL G-34 MOISTURE DETECTOR FOR BALED HOPS INTRODUCTION Thank you for purchasing the Delmhorst model G-34 Moisture Detector. The G- 34 is a rugged, reliable instrument that enables you to easily check moisture levels in baled hops to assure quality and safe storage. Features include: ...
  • Page 2 To check the %MC of bales connect the 830-2 (10 in) or 830-5 (12 in) prod to the H-4 handle. Connect the H-4 to the input connector marked “electrode” on the meter. Force the probe into the bale and read the moisture content on the meter scale.
  • Page 3 WARRANTY Delmhorst Instrument Co., referred to hereafter as Delmhorst, guarantees moisture meters for one year from date of purchase and any optional electrodes against defects in material or workmanship for 90 days. If, within the warranty...
  • Page 4 The express warranty set forth above constitutes the entire warranty with respect to Delmhorst meters and electrodes and no other warranty, written, oral, or implied applies. This warranty is personal to the customer purchasing the product and is not transferable. Rev 10/13 GlobalTestSupply www.

Table of Contents