Table of Contents
Advertisement
9
.
6
P
l
a
y
l
i
s
t
M
9
.
6
P
l
a
y
l
i
s
t
M
TRIMMING THE CLIP
You may review the clip by pressing play, turning the knob, or using the step forward/back buttons. Select the
desired start point by pressing the IN button and the end point by pressing the OUT button. Note that the thick
dark line in the middle of the screen is now a shorter line, which indicates the size of the clip you have just
created. If you have a large clip and wish to scroll through it quicker you can use the zoom feature located at the
top of the screen near the upper left corner of the window.
ADDING THE TRIMMED CLIP TO THE PLAYLIST
After trimming the clip from the source list select playlist from the top of the screen and either insert or append the
clip. To insert, highlight the clip you want the newly trimmed clip to be inserted above (insert always inserts above
the selection) and press insert. To append, simply highlight the next available area and press append. The new
clip has now been added to your playlist. You may now continue to the next clip in your source list or trim from
the same clip again and again creating multiple clips for your playlist from the same clip in your source list.
NAMING YOUR PLAYLIST
You may name each clip in your source list and/or your play list by highlighting the selection, then pressing name.
There are two screens for naming clips as shown below; you may designate up to 32 characters per clip. Note
the box in the left corner of the playlist screen with the words untitled playlist. Touch the box and the screen
changes to the naming screen, the words "untitled playlist" have moved but are still contained in a box. Touch the
box again and it will clear then type in the new name. Be sure to save your changes before turning off the
unit. (See saving play list, below).
Touch to move to the right screen
SAVING A PLAYLIST:
When you add to, change, or rename your play list you need to save it. To save your play list, select play list
from the main menu, notice the word SAVE is highlighted, press it and the play list is saved.
AUTOMATIC PLAYLIST LOAD:
In the upper left portion of the play list menu, there is a feature named a play load. With this feature, you can
designate one play list to automatically begin to play on power up, as soon as the hard drive is initialized.
AUTOMATIC PLAYLIST LOAD:
In the upper left portion of the playlist menu, there is a feature named a play load. With this feature, you can
designate one playlist to automatically begin to play on power up, as soon as the hard drive is initialized.
STORING MULTIPLE PLAYLISTS:
If you wish to make a new playlist with another name, choose an existing playlist and remove all or part of the
clips from it. You can make the necessary changes to the new playlist, re-name it and you now have multiple
playlists to choose from. Once you have more than one playlist you must select playlist from the main menu and
activate the one you wish to use by loading it.
REMOVING CLIPS:
If you want to remove clips from the playlist, highlight the selection and press REMOVE located at the top of the
screen.
DigiDeck digital video recorder™ Manual, Fast Forward Video, Inc. Revised 1/20/04
e
n
u
F
u
n
c
t
i
o
n
s
e
n
u
F
u
n
c
t
i
o
n
s
Touch to move to the left screen
16
Advertisement
Table of Contents
