Table of Contents
Advertisement
9 9
.
4
E
d
i
t
M
e
n
u
9 9
.
4
E
d
i
t
M
e
n
u
SOURCE LIST
CLIP0000
CLIP0001
The EDIT menu can only be accessed when in STOP (ready to play) mode. This menu directs you to the source
list. Here, you will have access to all of the recorded material on the hard drive, where you can edit/trim clips,
name clips, and create play lists.
9
.
5
P
l
a
y
l
i
s
t
M
e
n
9
.
5
P
l
a
y
l
i
s
t
M
e
n
The Play list option is only available if you are using native mode.
RECORDING CLIPS: Record the desired material either as one clip or as many individual clips. Each time you
begin and end a record a new clip will be added to the source list. The clips will be listed as untitled clips in the
source list with the length of the clip to the right of it.
PLAY LIST: To access the playlist function menu, touch the line that runs along the bottom portion of the touch
panel's main display or by selecting edit from the main menu. You must first be in ready to play or in STOP mode.
SOURCE LIST: Once you have finished recording, press stop. To access the source list menu, touch the line
located at the bottom of the main display or select edit from the main menu. There should be a list of untitled clips
in the sourcelist based on the material just recorded. Choose a clip by turning the knob and highlighting your
selection then press trim to edit the clip. You may name the clips in your source list if you wish or you can trim
them and name them after they are added to the play list. The source list contains all the originally recorded
material. You can trim the original clips and add them as new clips to the play list while always keeping the
original clip in your source list (unless you delete it).
TRIM: The trim function is for editing the original clips after they have been added to a play list. Below is an
illustration of the trim screen, which appears when you select trim from the play list window.
and their functions are briefly outlined below the illustration
2
4
1. 1.
IN AND OUT BUTTONS: used to designate the beginning and ending of a clip.
IN AND OUT BUTTONS:
2. 2.
SCRUB BAR: Scrolling indicator.
SCRUB BAR:
3. 3.
ZOOM:
ZOOM: (Not shown) allows you to scroll through the clip faster.
4 4 . .
SOURCE LIST CLIP: Indicates the number of the clip currently in use under trim mode.
SOURCE LIST CLIP:
5. 5.
FRAME:
FRAME: Indicates the number of the frame in use as you scroll through the material with the scrub bar.
DigiDeck digital video recorder™ Manual, Fast Forward Video, Inc. Revised 1/20/04
NAME
00:00:10:00
00:00:30:00
u
u
3
5
TRIM
APPEND PLAY LIST
1
Ω Ω
Specific features
15
Advertisement
Table of Contents
