Playback Menu - FFV DigiDecK User Manual

9 . 3 P l a y b a c k M e
9 . 3 P l a y b a c k M e
Playback Menu Main Display 8
SLOW MOTION
LOOP PLAY
PLAY SPEED
SLOW MOTION
This allows you to define the clarity of the image to suit your needs. If you select frame mode in slow motion
play back and stop on a single frame, it may appear jerky, as the DigiDeck switches between the two fields of
the frame. If you now select field, the image will stop moving and you will only see half the horizontal lines of
resolution.
LOOP PLAY
Allows you to play a segment of designated video in Loop mode, endlessly. Be sure to enable the loop play
feature under the playback menu.
Play Speed
Play Speed
Genlock
Genlock
Genlock can be enabled to use with an external or internal generator. The internal Genlock will lock to the
time code of the recorded video.
H Sync Pos and S C Phase
H SYNC POS: Allows you to set the H sync position and adjust the horizontal timing of the reference signal.
S C PHASE: Allows you to set the sub carrier phase and adjust the timing of the color signal.
Push SET and the following option screen appears:
DigiDeck digital video recorder™ Manual, Fast Forward Video, Inc. Revised 1/20/04
n u
n u
FIELD 1,2
OFF
30 FPS
Allows you to select the desired speed for playback.
1. Push the square next to the play speed choice on the playback
menu;
2. Use the up and down arrows to select the desired speed;
3. Push OK when your selection is displayed.
To return to the default 1/1 (30 frames per second) quickly, just
press the square.
GENLOCK
Set the timing by turning the knob to the left for
lead or to the right for lag, PUSH OK
OFF
14