Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Advertisement
Table of Contents
Related Manuals for ISLABIKES Creig
Summary of Contents for ISLABIKES Creig
- Page 1 Creig Owner’s manual www.islabikes.com www.islabikes.com...
-
Page 2: Serial Number
12. Handlebars 13. Grip shift 19. Cassette 14. Rim 20. Frame Serial number 15. Spokes 21. Suspension Fork 16. Tires 22. Cranks 17. Chain 23. Pedals 18. Rear derailleur Creig 24 / Creig 26 E-mail: support@islabikes.com Telephone: 503 954 2410... -
Page 3: Recommended Torque Settings
We carry stock of replacement parts for your Islabike including inner tubes, tires and grips. Please visit our website for a list of readily available spares or contact us at 503 954 2410 or info@islabikes.com. We only recommend using genuine parts for safety critical components e.g. -
Page 4: Suspension Forks
On or Off turn the knob on top of the right fork leg. Do not pull brake when calliper spacer is removed. Please keep calliper spacer for transportation when wheel is removed. Creig 24 / Creig 26 E-mail: support@islabikes.com Telephone: 503 954 2410... - Page 5 - see image above. If the gears are not working correctly contact our technical support team at 503 954 2410 or email support@islabikes.com Creig 24 / Creig 26 E-mail: support@islabikes.com...
-
Page 6: Tires And Tubes
Infl ate to correct pressure and then carefully re-tighten to close the valve. Find our guide to infl ate your tires on the Islabikes YouTube channel. Put front wheel into the fork. Ensure QR lever is not on drive side. - Page 7 3 Brakes. If for any reason they are untrue our wheels can be easily repaired. Please contact our technical support team at 503 954 2410 or email support@islabikes.com. Hubs - Your hubs are fi tted with cup and cone bearings. Although they are sealed, water and grit can enter your hubs and cause premature wear.
-
Page 8: Disc Brakes
If the pads are not contacting the discs correctly, they are uneven, rubbing or feel spongy to apply please contact our technical support team at 503 954 2410 or email support@islabikes.com Brake pad wear and replacement – Brake pads do not last forever. -
Page 9: Maintenance
Left pedal – rotate pedal axle clockwise towards front of bike. Right pedal – rotate axle counter clockwise towards front of bike. Tighten max. 30Nm Please ensure you identify the left and right pedals before installing. Creig 24 / Creig 26 E-mail: support@islabikes.com Telephone: 503 954 2410... -
Page 10: Adjust Saddle Height
Discontinue use immediately if anything untoward is spotted and contact our technical support team at 503 954 2410 or email support@islabikes.com. Creig 24 / Creig 26 E-mail: support@islabikes.com Telephone: 503 954 2410... - Page 11 User guidelines Step 6 of 6 Brake pad bed-in Your Creig has been designed to be ridden on rough trails, rough unpaved roads and rough terrain that require technical skill. Jumps and drops are intended to be less than 61cm It is important to bed-in your new brake pads to achieve optimal (24inches).
-
Page 12: Safety First
We pride ourselves on light action brakes. Check your child www.islabikes.com or call 503 954 2410 can come to a stop safely using the brakes. Walk beside them and assist them in pulling the brake lever to allow them to feel its responsiveness.
Need help?
Do you have a question about the Creig and is the answer not in the manual?
Questions and answers