Switch Vaping Modes; Adjustment Of Air Flow; Smart Vw Mode; Bypass Mode - Vaporesso Polar User Manual

7. Switch Vaping Modes

Long press the mode button for three seconds to switch among :
Smart VW(H/N/S) / VT(SS, Ni, Ti) / TCR(M1, M2) / BYPASS / CCT /
CCW / VV / CCV / Super Player (0.03-5Ω). Common mode introduction
is in below:

1) Smart VW Mode

As an advanced Variable Wattage mode, there are 3 levels of VW: H stands for High;
N stands for Normal; S stands for Soft. The default setting is Normal. VW(H/N/S) will
guarantee your mod' s ability to skillfully select the adequate average wattage for your
atomizer, according to its resistance reading, automatically.

2) BYPASS Mode

Direct output voltage system is applied in Bypass mode. The higher the battery level is,
the higher the output voltage is. When set in this mode, the device can support a coil whose
resistance is within the range of 0.05-5ohm.
3) SUPER PLAYER Mode (Additional)
Adaptive to all Mainstream RDA Tanks

8. Adjustment of Air Flow

The bottom airflow system can be adjusted by twisting the airflow ring.
9. Filling E-liquid
Lift and twist the top lid counter clockwise to the fullest extent. Add your
favorite E-juice through the opening and slide the lid back. Allowing the
safety locking mechanism to secure the lid.
OPEN
CLOSE