Danfoss PTU 025 Installation Instructions Manual page 5

Installation Instructions
Pressure Signals on Outputs
The frequency converter can be configured to transmit the pressure values on analog output or active status on digital and relay
outputs. Perform the configuration in parameter group 5-** Main Menu - Digital In/Out and parameter group 6-** Main Menu - Analog
In/Out. See the wiring diagram in Illustration 1.6.
Illustration 1.6 Wiring Diagram
MI08A102
Pressure Transmitter Unit PTU 025
®
VLT HVAC Drive FC 102
Danfoss A/S © 12/2017 All rights reserved.
5