Quick Set-Up Guide; Connection Example - Runco Reflection VX-1000d Owner's Operating Manual

Widescreen digital light processing projector & dhd video controller
Table of Contents

Advertisement

Quick Set-up Guide

Connection Examples
AC Power In
(100-240 VAC)
RGB Input
(from DHD Controller
RGBHV output to
Projector RGBHV)
Serial No
Runco International
Union City, CA
Model
OUTPUTS
Pr
Y
Pb
R
G
B
Video Processor / Controller
H
V
H/V
DVI Out
While there are many different ways to connect your source equipment to your DHD Controller,
the examples shown above are the most common.
ANALOG INPUTS:
• Composite Video Input
Composite video is the most common type of signal used, but is also the lowest in picture quality. Many sources
have outputs that are limited to composite video, such as some VCR's and camcorders; others such as Laser Disc
players actually produce slightly better results when using composite video.
• S-Video Input
S-video is the second-best type of signal that can be used, but is MUCH better than composite video. Using such
sources as Satellite receivers, high-quality VCRs and DVD players (with no component output) will produce a
MUCH cleaner and sharper signal.
• Component Input
Component video is the best type of signal that can be used. The most common sources that use component out-
puts are DVD players, and it is highly recommended that component be used when possible. Component video
goes one step beyond S-video in picture quality; chroma (color) information is more resolved and the overall pic-
ture appears more well-defined. (be sure to shut off progressive scan on your DVD player)
• HD1 / HD2
These are High Definition Analog inputs to connect the outputs of high definition sources such as HD tuners and
set top boxes, HD satellite receivers, etc. These inputs will accept signals as RGB, RGBHV or Component Video
(YPrPb).
DVI-I IN
(from the DHD
ComLink
Controller DVI Output to
(from the DHD
Projector DVI Input)
Controller RJ-11 to
Projector RS-232)
INPUTS
Pr
Y
Pb
R
G
B
H
V
HD1
HD2
R
G
B
H
V
Pr
Y
Pb
SDI
Pb
DVI 1
DVI 2
Option
Component Video
SYSTEM CONTROL INTERFACE
TRIGGERS
1
2
3
IR
S-Video 1
Pr
Y
Video
S-Video 2
RS-232 Out
RS-232 Control
14
VX-1000d Projector
CAUTION
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
DHD
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
Controller
THIS APPLIANCE TO RAIN OR MOISTURE.
100-230VAC 50-60 Hz, 165 Watts Max
Made In USA

Advertisement

Table of Contents
loading

Table of Contents