HP 98700H CE Handbook page 45

Long Test patterns
Select #2 test from the menu. If the test is passed a message similar to
the following appears:
The 98700 in pos 0 passed its test.
1 device was found in the HP-HIL loop.
If the test is failed a message similar to the following appears:
Test failed. Suspect the 665XX board.
1 device was found on the HP-HIL loop.
98710A Graphics Accelerator Test
Select #3 test from the menu. If the test is passed a message similar to
the following appears:
The 98700 in pos 0 passed its test.
1 device was found in the HP-HIL loop.
If the test is failed a message similar to the following appears:
Test failed. Suspect the 665XX board.
1 device was found on the HP-HIL loop.
CRT Patterns
Select #4 from the menu. The monitor screen will display a new menu
of patterns to be used for allignment of the monitor. Each pattern will
stay on screen untill you select a new pattern. Refer to the HP 98782A
Hardware Support Document, part number 98782-90030 for monitor
alignment procedure.
Diagnostics 5-5