Site Preparation - HP 98700H CE Handbook

Site Preparation
Refer to the HP 9000 Series 200/300/500 Site Preparation Document,
part number 09000-90041, to assist you in preparing for the installation
of the HP 98700H Graphics Display Station. Refer to the lists in Chapter
1 for specific power and environmental requirements.
Cable Restrjctions
RGB Cables
There are two styles of RGB cables supported with the display station:
• A single, three metre cable with three shielded conductors. Each
conductor is color coded for RG B and terminated with BN C conec-
tors .
• A set of three co-ax cables with BNC connectors. One for each
color. There is no real limitation on the length of the cables other
than loading. Due to this loading, the maximum supported length
is 30 metres. Two lengths are available from Hewlett-Packard, 15
metres and 30 metres.
Series 300110 Interconnect Cable
The Series 300 interconnect cable connects the Model 310/320 to the
HP 98700. The cable connector key projects outward near the top from
each end of the connector shell. Ensure that this is UP when connecting
to the I/O card or the HP 98700.
Series 500 Display Station Buffer Interconnect Cable
The Display Station Buffer Interconnect cable (p/n HP 98700-61583)
connects the Model 550 to the HP 98700.The interconnect cable is in-
stalled by an HP Customer Engineer or HP trained engineer.
The HP 98700 end of the cable is installed with the keys on the connector
in the top position. The cabinet connector has two slots on the sides of
its shell to accept the keys on the cable connector.
2-2
Environmental/Installation/Preventive Maintenance