Sun Microsystems StorageTek 6140 Administration Manual page 168

TABLE 5-2
LED/Indicator
Controller Indicators
Host Port Rate
Expansion Port Rate
Expansion Port Bypass
FIGURE 5-3
152 Sun StorageTek Array Administration Guide • May 2006
Controller Tray LEDs and Indicators (Back) (Continued)
Description
The combined display indicates the host port link
rate for the tray:
• LED 1 On, LED 2 On – 4 Gbits/second
2
1
• LED 1 Off, LED 2 On – 2 Gbits/second
4
• LED 1 On, LED 2 Off – 1 Gbits/second (Not
The combined display indicates the expansion port
link rate for the tray:
• LED 4 On, LED 2 Off – 4 Gbits/second
2
• LED 4 Off, LED 2 On – 2 Gbits/second
4
Steady amber indicates that no valid device is
detected and that the drive port is bypassed. Off
indicates that there is no small form factor plug-in
(SFP) transceiver installed or that the port is
enabled.
shows the LEDs on the back of the expansion tray.
supported)