Runco VX-33I VX-33I Installation & Operation Manual page 81

Table 6-1. Serial Commands and Responses (continued)
Command
SISF 0
Loads "ISF Night" image preset
SISF 1
Loads "ISF Day" image preset
SISF 2
Loads "Custom 1" image preset
SISF 3
Loads "THX" image preset
The following serial commands are meant to emulate buttons on the remote control or DHD
Controller front panel. Each button has its own serial command, so effectively it is as if you were
using the IR remote only you'll be doing so via serial commands. These commands provide active
OSD responses just like the IR remote.
ENTR
ENTER (or SELECT) button
EXIT
EXIT button
MENU
MENU button
MND
Down-Arrow (
MNL
Left-Arrow (
MNR
Right-Arrow (
MNU
Up-Arrow (
The following serial commands are meant to emulate the discrete picture adjustment buttons on
the remote control unit. Use them in conjunction with
adjustments. For example, to increase Brightness by five increments, send this sequence of
commands:
MBR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
EXIT <Enter>
MBR
Adjust Brightness
MCOL
Adjust Color Level
MCON
Adjust Contrast
MTIN
Adjust Tint
Runco VX-33i Installation/Operation Manual
Description
Image Preset Commands
Menu Navigation Commands
) button
) button
) button
) button
Picture Adjust Commands
MNL
Response
ISF Night
ISF Day
Custom 1
THX
(none)
MNR
and/or to make picture
(none)
65