LG LB-B2156QC Owners & Installation Manual page 35

Heating operation (Heat pump model only)
ON
A/SWING
TEMP
FAN SPEED
MODE
ON
1
Press the Start/Stop button.
The unit will respond with
a beep.
2
Open the door of the remote controller. To select Heating
Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
Cooling
3
Close the door of the remote controller.
Set the temperature higher than the room temperature.
The temperature can be set within a range of 18°C~30°C at
intervals of 1°C.
4
Set the fan speed again with the door of the
remote controller still closed. You can
select the fan speed in Three steps–low,
medium, & high. Each time the button is
pressed, the fan speed mode is shifted.
35
Auto Healthy
Dehumidification
To raise the temperature
To lower the temperature
Heating
(Heat pump model only)