LG LB-B2156QC Owners & Installation Manual page 33

Auto operation (Optional)
ON
A/SWING
TEMP
FAN SPEED
MODE
ON
During Auto Operation
 You cannot control the indoor fan speed. It has already been set by the Fuzzy rule.
 If the system is not operating as desired, manually switch to another mode. The system will not
automatically switch from the cooling mode to the heating mode, or from heating mode to cooling
mode, it must be done by manually resetting.
1
Press the Start/Stop button.
The unit will respond with
a beep.
2
Open the door of the remote controller. To select Auto
Operation, press the operation mode selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
Cooling
3
The temperature and fan speed are automatically set by the
electronic controls based on the actual room temperature. If
you want to change the set temperature, press the Room
Temperature Setting buttons. The cooler or warmer you feel,
the more times (up to two times) you should press the button.
The set temperature will be changed automatically.
CHAOS speed is not available for low static duct unit.
*
33
Auto
Healthy
Dehumidification
To raise the temperature
To lower the temperature
Heating
(Heat pump model only)