Functional Description; Installing Or Removing Battery Cartridge - Makita DLM461 Instruction Manual

2. Attach the mulching attachment while pulling the
lever, and then release the lever to lock the mulching
attachment.
► 1 . Mulching attachment 2. Lever
FUNCTIONAL
DESCRIPTION
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
tridge firmly when installing or removing battery
cartridge. Failure to hold the tool and the battery
cartridge firmly may cause them to slip off your hands
and result in damage to the tool and battery cartridge
and a personal injury.
CAUTION:
Make sure that you lock the battery
cover before use. Otherwise, mud, dirt, or water may
cause damage to the product or the battery cartridge.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
NOTE: The tool does not work with only one battery
cartridge.
2
To install the battery cartridge;
1. Pull up the locking lever, and then open the battery cover.
1
► 1 . Battery cover 2. Locking lever
2. Align the tongue on the battery cartridge with the slot on the
mower then slide the cartridge until it locks in place with a little click.
► 1 . Battery cartridge
3.
Insert the lock key in the place shown in the figure
as far as it will go.
► 1 . Lock key
4. Close the battery cover and push it until it is
latched with the locking lever.
To remove the battery cartridge from the mower;
1. Pull up the battery cover locking lever and open
the battery cover.
2. Pull out the battery cartridge from the mower while
sliding the button on the front of the cartridge.
3. Pull out the lock key.
4. Close the battery cover.
8 ENGLISH
1
2
1
1