Lenovo ThinkAgile VX2320 User Manual page 16

Table of Contents

Advertisement

3
XClarity Controller USB connector
Depending on the setting, this connector supports USB 2.0 function, XClarity Controller management
function, or both.
• If the connector is set for USB 2.0 function, you can attach a device that requires a USB 2.0 connection,
such as a keyboard, a mouse, or a USB storage device.
• If the connector is set for XClarity Controller management function, you can attach a mobile device
installed with the application to run XClarity Controller event logs.
• If the connector is set to have both functions, you can press the ID button for three seconds to switch
between the two functions.
4
USB 3.0 connector
Attach a USB-compatible device, such as a USB keyboard, USB mouse, or USB storage device.
5
Operator information panel
For information about the controls and status LEDs on the operator information panel, see "Operator
information panel" on page 13.
6 10
Rack latches
If your server is installed in a rack, you can use the rack latches to help you slide the server out of the rack.
You also can use the rack latches and screws to secure the server in the rack so that the server cannot slide
out, especially in vibration-prone areas. For more information, refer to the Rack Installation Guide that comes
with your rail kit.
7
Hot-swap drive bays
The number of the installed drives in your server varies by model. When you install drives, follow the order of
the drive bay numbers.
The EMI integrity and cooling of the server are protected by having all drive bays occupied. The vacant drive
bays must be occupied by drive fillers.
8
Drive status LED
9
Drive activity LED
Each hot-swap drive has two LEDs.
Drive LED
8
Drive status LED (right)
9
Drive activity LED (left)
12
User Guide for ThinkAgile VX2320, VX3320
Status
Solid yellow
Blinking yellow (blinking slowly, about one
flash per second)
Blinking yellow (blinking rapidly, about four
flashes per second)
Solid green
Blinking green
Description
The drive has an error.
The drive is being rebuilt.
The RAID adapter is locating the drive.
The drive is powered but not active.
The drive is active.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkagile vx3320

Table of Contents