Page 1
When tire pressure is properly maintained the tread life of the tire is maximized, fuel economy is increased and vehicle handling is improved. PART# 40001 ATTENTION! READ ALL INSTRUCTIONS CAREFULLY Failure to follow warning instructions can result in fire, injury to persons or property damage.
Page 2
1. Select appropriate power connection adaptor with fuse (A, B or C below) and attach adaptor to 8’ main harness power cord. A • Attaches directly to battery (motorcycle) B • Clips to battery (ATV/mower) C • Plugs into DC power outlet (auto) 2.
Page 3
TIRE INFLATOR SET-UP INSTRUCTIONS 1. For use with 12-volt DC power outlet rated 15 amps or higher. Do not use with older 8 amp cigarette lighter receptacles. 2. You may need to be in “accessory” or “on” position. Please make sure emergency brake is set and car is in park. Always ensure air hose chuck touches the core of the valve stem for proper inflation.
TROUBLESHOOTING Inflator fails to operate when plugged in: 1. The fuse, located in the plug adaptor (C), may have blown. Unscrew the tip of the plug adaptor, remove fuse, and inspect. (If necessary, replace fuse with one of the same amperage.) 2.
Need help?
Do you have a question about the 40001 and is the answer not in the manual?
Questions and answers