Table of Contents
Advertisement
18. Follow the on-screen instructions to complete product setup. When you see this screen, click Finish
(Windows) or Close (Mac) to close the installation program.
Parent topic:
Setting Up Your Product Using a Temporary USB Connection
To add your product to a wireless network, you may need to know the name (SSID) and password of
your wireless network. If it has security enabled, you also need to know the WEP key or WPA
passphrase.
Note: You may also need to know your network name (SSID) and password if your computer is
connected to a router using an Ethernet cable.
If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is
required to obtain the product software.
1. Make sure your product is turned on but NOT CONNECTED to your computer with a USB cable.
Note: With Windows, if you see a Found New Hardware screen, click Cancel and disconnect the
USB cable.
Setting Up Your Product on a Wireless Network
19
Advertisement
Table of Contents
