Table of Contents
Advertisement
Setting Up Your Product Using a Temporary USB Connection
Setting Up Your Product with Wi-Fi Auto Connect
Your product broadcasts its network information for 60 minutes from the time ink charging begins. If you
run the product's software setup package within this 60 minute period, the software automatically
connects the product to your wireless network without you having to enter your network name (SSID)
and password.
Note: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is
required to obtain the product software.
1. Make sure your product is turned on but NOT CONNECTED to your computer with a USB cable.
Note: With Windows, if you see a Found New Hardware screen, click Cancel and disconnect the
USB cable.
2. Insert the product CD or visit
your product's software package.
Note: With Windows, if you see the message Do you want to allow this app to make changes to
your device?, click Yes, then click OK on the next screen. On a Mac, if you see the message
"EPSON" is an application downloaded from the Internet. Are you sure you want to open it?,
click Open.
3. Select your language and click Next (Windows), or click Continue and click Continue again (Mac).
4. Accept the software license agreement to continue with software installation.
epson.com.jm/support
and select your product to download and run
10
Advertisement
Table of Contents
