Kodak VERITE CRAFT 6 Quick Start Manual

KODAK VERITÉ Craft 6
WIRELESS ART & CRAFT PRINTER
Quick Craft Guide
1

Overview

Photo tray (4x6")
Top tray (8.5x11")
Scanner
Paper exit tray
Ink door
2

Selecting Material

a b
Select material type on the control panel Display will show material selected and
of printer or through the App. where to load.
Material Selection Material Selection Craft Print
Paper LEATHER use for light Place the material on
Cardstock
the rear tray
and thin material.
Fabric and push material
Leather into the tray
LOAD at rear tray
Custom
Cancel OK
Material Weight
17 - 24 lb.
Plain paper
64 - 90 g/m 2
Photo paper 50 - 65 lb.
(Glossary) 180 - 240 g/m 2
Top tray Rear tray
20 - 24 lb.
Envelope
75 - 90 g/m
2
90 - 110 lb.
Card
163 - 200 g/m 2
Note(s)
The KODAK VERITÉ Craft printer can accept a maximum material thickness of 1.2 mm (0.05") through the rear tray.
Non-rigid materials need to be handled carefully during loading as the material might bend and cause a jam. The best way is to support the material during
loading with two flat hands into the rear tray.
Thin flexible materials should be taped to a paper carrier to keep it flat during printing as long as the overall thickness does not exceed 1.2 mm (0.05").
Make sure that the material selected are printable. For example some of the vinyl materials cannot be used as the ink will smear/not dry. Please use only
printable vinyl or add an Inkjet print primer (not included) to you material
Make sure that materials loaded through the rear input tray don't have rough edges, strings or loose parts may cause the printer to jam.
Material button
Wireless button
Copy button
Power/Standby button
c
Confirm setting by pressing
Material Selection Material Selection
LEATHER use for light
and thin material. Set material
after print is started.
LOAD at rear tray
OK
Material Details
Cardstock Used for greeting, photo and decoration cards
Fabric Used for lightweight cotton or cotton/polyester fabrics
Leather Used for faux leather
Custom settings allows you to select optional materials
through the KODAK VERITÉ Craft app (iOS/Android). For
Custom
more information download the KODAK VERITÉ Craft app
and select Tutorial under Print your own Design.
3

Loading Material

a
Select a material type "cardstock/fabric/faux leather/
custom" on the printer or through your tablet/
smartphone app.
When "paper" is selected, printing will be done
JF383UC
through the top or photo tray.
When cardstock, fabric, faux leather or custom is
★★★★★
selected, printing will be done through the unique
craft rear tray.
Material settings will be held by the printer until the
* 2 P M H 0 0 4 8 1 *
printer goes into sleep mode (default 10 minutes).
The printer's default material setting is for paper.
Material Selection
LEATHER use for light
and thin material.
Rear tray
LOAD at rear tray
4

How to Print from Your Device

AC inlet
Printer USB port
a
Download a PC driver using the following URL.
www.kodakverite.com/support
.
b
Install the PC driver and set up your printer via USB or Wi‑Fi by following the
on‑screen instructions.
c
Create and print your personal images or photos by using your favorite 3rd party
software (not included) from your PC/Laptop.
OK
Discover the KODAK VERITÉ Craft printer features videos on:
Learn more: additional help and information
The Kodak trademark, logo and trade dress are used under license from Kodak.
b
Open or create a content file or photo to be printed
on your PC, tablet or smartphone. Print the content
and wait until the printer display shows "Place the
material on the rear tray and push material into the
tray".
Craft Print
Place the material on
the rear tray
and push material
into the tray
OK Cancel
PC/Laptop
a
Search "kodak verite craft" at App Store or Google Play.
*
* Requires Mac OS X v10.9 or later
b
Install "KODAK VERITÉ Craft" App.
c
Create and print your personal images by selecting "Print Your Own Design" from
the KODAK VERITÉ Craft App.

Bonus Anna Griffin Design Templates

Install the KODAK VERITÉ Craft app (iOS/Android)
from the app store and instantly access to bonus
craft content.
c
Load the material with two flat hands gently into the
printer until you feel some resistance (level depends
on thickness of material) and the printer display
shows .
Note(s)
For the best printing results please use print with border
as it is difficult to print accurate edge to edge with thicker
craft materials.
Tablet and Smartphone App
kodak verite craft
ENJOY
FREE BONUS
MATERIAL
www.kodakverite.com/printer/kodak-craft
www.kodakverite.com/support
© 2017 Funai Electric Co., Ltd. All rights reserved.