Advertisement
3)
If mounting bracket is used (optional), slide down the charging station along the
guided track to secure the charging station to the mounting bracket.
charging station by pressing down the bracket release and pull the charging station
upward until it clears the guided track.
4)
External light indication can be used to remind the user whether the transmitter is
situated on the charging station or not. Connect the two wires from the external light
indicator to the "+" and "-" screw-type connectors. The charging station feeds 12VDC
through this external light indicator output with 12VDC power input, feeds 24VDC with
24VDC power input and feeds 12VDC with 110~240VAC power input. Make sure the
required voltage of the external light indicator used is same as specified. Set to normal
open (NO) for lights ON when transmitter is situated on the charging station and normal
close (NC) for lights ON when transmitter is not situated on the charging station.
Page 3
Remove the
Advertisement
