Accessories; Adding Brazed Plate Heat Exchanger (Bphe Kit) - Carrier 80HMA-M00 Installation, Operation And Maintenance Instructions

6.1 Adding Brazed Plate Heat Exchanger (BPHE Kit)

The Brazed Plate Heat Exchanger (BPHE Kit) and Water
Pump are installed in the 80HMA Comfort Module to separate
the external hydraulic circuit (primary loop) from the internal
circuit (secondary loop).
E
P x 1
O x 1
N x 1
M x 1
L x 1
Box content:
A: Clip- Ø21
B: Nut
C: Screw
D: Brazed Plate Heat Exchanger (BPHE)
E: O-ring 21.89 x 2.62 on BPHE
F: Pipe to Heat Pump
G: Insulation Rubber
H: O-ring 20.22 x 3.53 inlet Pump
I: Pump inlet connector
J: Clip- Ø20
K: Pump
L: Pipe from Heat Pump
M: O-ring 17.86 x 2.62 outlet pump
N: Clip- Ø18
O: Pump Outlet Pipe
P: Pump plug & cable
A x 4
J x 1
K x 1

6. ACCESSORIES

BPHE kit code:
80HMA-9004 for Heat Pump up to 8 kW
80HMA-9005 for Heat Pump up to 16 kW
B x 2
I x 1
H x 1
C x 6
D x 1
E x 4
F x 1
G x 3
125
80HMA