Advertisement
Span adjustment in rising differential mode or trailing differential mode
● This mode is used to cancel the gradual changes in the measured value, and to
only detect sudden changes.
● When performing rising differential mode or trailing differential mode, preset "Ris-
ing differential mode" or "Trailing differential mode" in the sensing output setting of
the PRO mode. For the setting method, refer to "
● T he threshold can be set by using the threshold value fine adjustment function.
For the threshold value fine adjustment function, refer to "
UE FINE ADJUSTMENT FUNCTION."
1. Press the TEACH key.
2. Press the UP key or DOWN key to select the span.
Short span
3. Press the TEACH key to set.
8
THRESHOLD VALUE FINE ADJUSTMENT FUNCTION
● Fine adjustment of the threshold can be performed in the measurement display.
● Fine adjustment of the threshold can be performed even after teaching.
<Normal sensing mode, rising differential mode or trailing differential mode>
Press the UP / DOWN key
Press the UP / DOWN key
<Window comparator mode>
● When the sensing output is set to window comparator mode, the display of
"
" and "
" can be changed by pressing the TEACH key for 1 second.
Press the TEACH
Change the thresh-
key for 1 second
old value
● W hen performing a fine adjustment of the threshold of "
the UP key or DOWN key. After "
ment of the threshold can be performed.
Press down UP /
DOWN key
Automatic
or
9
PEAK / BOTTOM HOLD FUNCTION
● The peak / bottom hold function, is for displaying the peak value and bottom value.
● W hen the zero set function is executed while the peak / bottom hold function is
set to "Peak hold" or "Bottom hold", the held measured value will be reset.
Press the TEACH key
and UP key simultane-
Press down UP /
ously for 3 seconds.
DOWN key
or
or
Automatically set after
or
about 3 seconds.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
PRO MODE SETTING."
12
THRESHOLD VAL-
8
Long span
Press the TEACH key
Confirmed
Automatically
set after about 3
seconds.
Measurement display
Automatic
" or
" is displayed, the fine adjust-
" or "
Press down UP /
Press the TEACH
DOWN key
key
(Automatically set after about 3 seconds.)
Press the TEACH key
Confirmed
Select
Digital Display
Description
Function
Releases the hold status,
Hold function
and outputs the current
release
measured value
Holds maximum mea-
Peak hold
sured value
Holds minimum measured
Bottom hold
value
10
ZERO SET FUNCTION
● The zero set function is the function to compulsorily set the measured value to "zero".
● T he zero set indicator (yellow) will turn ON when the zero set is valid.
● W hen the zero set function is executed while the peak / bottom hold function is
valid, the held measured value will be reset.
● W hen the display setting is set to Offset, the zero set function cannot be set.
<Zero set setting>
Press the UP key and DOWN key
simultaneously for 3 seconds.
Confirmed
<Zero set release>
Press the UP key and DOWN key
simultaneously for 6 seconds.
"
played during this
period.
● T he setting or releasing of the zero set from an external input operates as in the
following figure.
10ms or more
ON
OFF
● W hen the power is turned ON again, zero set from external input can be released.
At this time, the zero set will not be saved.
● E ven when the zero set is set in the sensor, the zero set can be set or released
from an external input. However, when the power is turned ON again, the zero set
set in the sensor will be displayed.
11
KEY LOCK FUNCTION
● The key lock function is to prevent acceptance of key operations, so that the con-
ditions set in each setting mode are not changed accidentally.
● When key operation is performed after the key lock is set, "
on the digital display.
<Key lock setting>
Press the TEACH key and DOWN
key simultaneously for 3 seconds.
<Key lock release>
Press the TEACH key and DOWN
key simultaneously for 3 seconds.
", press
12
PRO MODE SETTING
Part description
Confirmed
TEACH key (Confirmed)
● The PRO indicator (yellow) will turn ON when the PRO mode is set.
● When the DOWN key is pressed for 3 seconds or more in the middle of the PRO
MODE setting, the display returns to the measurement display.
Item
Response speed
setting
Output operation
setting
Sensing output
setting
Hysteresis setting
External input
setting
Timer setting
Display setting
Hold setting
ECO Setting
Reset setting
Automatic
" will be dis-
Zero set setting
Zero set valid period
Automatic
Automatic
Arrow description in figures
PRO indicator (Yellow)
DOWN key (Select)
UP key (Select)
Default setting
Set the response time.
"
": High precision 10ms, "
"
": High speed 1.5ms
Select the control output operation mode.
"
": Light-ON, "
Set the sensing output.
"
": Normal sensing mode
"
": 1-point teaching (Window comparator mode)
"
": 2-point teaching (Window comparator mode)
"
": 3-point teaching (Window comparator mode)
"
": Trailing differential mode
"
": Trailing differential mode
<HG-C1030>
<HG-C1050>
Set the hysteresis width.
HG-C1030: 0.001 to 5.00mm
<HG-C1100>
<HG-C1200>
HG-C1050: 0.01 to 15.00mm
HG-C1100: 0.02 to 35.00mm
HG-C1200: 0.1 to 80.0mm
<HG-C1400>
HG-C1400: 0.2 to 200.0mm
Set the external input.
"
": Zero set function, "
"
": Light emitting stop function, "
Set the timer operation. The timer time is fixed at 5ms.
"
": No timer, "
"
": ON-delay timer, "
The display of the measured value can be changed.
"
": Normal, "
Set the control output and the analogue output operation when
a measurement error occurs (insufficient light intensity, satura-
tion of light intensity, out of measurement range).
"
": Hold OFF, "
The digital display can be set to go OFF when key operation is not
performed for 30 seconds. Current consumption can be reduced.
"
": ECO OFF, "
Return to the default setting (factory setting).
"
": Reset NG, "
1 sec.
Zero set release
" will be displayed
: Press the TEACH key
: Press UP key or DOWN key
: Press DOWN key
Description
": Standard 5ms
": Dark-ON
": Teaching function
": Trigger function
": OFF-delay timer
": One-shot timer
": Invert, "
": Offset
": Hold ON
": ECO ON
": Reset OK
Advertisement
