To Use The Wi-Fi Direct Function; To Use The Miracast; Tm / Intel's Widi; Setting A Network - Warning - LG LB580N Owner's Manual

To use the Wi-Fi Direct function

SMART → SETTINGS → NETWORK → Wi-Fi Direct
Wi-Fi Direct is a function that allows your monitor to connect with a Wi-Fi Direct device without Internet
connection. With SmartShare
TM
1 Set Wi-Fi Direct to On. (If you do not use it, please change it to Off.)
2 Enable the Wi-Fi Direct settings on the device that you want to connect to.
3 A list of devices that can be connected to the monitor is displayed.
4 Select a device to connect.
5 Select Yes, when the connection request message appears.
6 If the device that you want to connect accepts the request, Wi-Fi Direct is connected.

To use the Miracast

/ Intel's WiDi function
TM
SMART → SETTINGS → NETWORK → Miracast
You can view the screen of a device with Miracast
TM
1 Set Miracast / Intel's WiDi to On. (If you do not use it, please change it to Off.)
2 Enable the Miracast TM / Intel's WiDi settings on the device that you want to connect to.
3 A list of devices that can be connected to the monitor is displayed.
4 Select a device to connect.
5 Select Yes, when the connection request message appears.
6 If the device that you want to connect accepts the request, Miracast
y Some models may provide the Intel's WiDi function only.
y When Wi-Fi Direct is set to Off, if you set Miracast
automatically set to On.
y When you set the Miracast
setting.
y It is recommended to connect a laptop using IIntel's WiDi within close range.
y Though Intel's WiDi can be connected without a wireless router, it is recommended to connect the
wireless router first for optimal performance.
y You may not connect your monitor to a non-LG Electronics device even when it is detected.
y It is recommended you to connect a device to a 5GHz router.
y The response rate may vary depending on the user's environment.
y For more information on the device you want to connect to, refer to its owner's manual.

Setting a network - warning

y Use a standard LAN cable (Cat5 or higher with RJ45 connector, 10 Base-T or 100 Base TX LAN port).
y Resetting your modem can cause network connection problems. To resolve the problem, turn the
power off, disconnect and reconnect, and then turn the power back on.
y LG Electronics is not responsible for any network connection problems or any faults, malfunctions and
errors caused by an network connection.
y A network connection may not work properly depending on the Internet service provider.
y A DSL modem is required for a DSL service; a cable modem is required for a cable service. Only a
limited number of network connections may be available, and monitor network setting may not be
available depending on your contract with your Internet Service Provider (ISP). (If only one device is
allowed per line and the PC is already connected, other devices cannot be used.)
y Wireless networks can be subject to interference from other devices operating at a frequency of 2.4
GHz (wireless phones, Bluetooth devices or microwave ovens). There may also be interference from
devices with a frequency of 5 GHz, same as other Wi-Fi devices.
y The surrounding wireless environment can cause the wireless network service to run slowly.
y If you do not turn off the entire local home network, network traffic may occur on some devices.
y For an AP connection, an access point device that supports wireless connection is required and the
wireless connection feature must be enabled on the device. Contact your service provider regarding
availability of wireless connection on your access point.
y Check the SSID and security settings of the AP for AP connection. Refer to the appropriate
documentation for SSID and security settings of the AP.
y Invalid settings on network devices (wired / wireless line sharer, hub) can cause the monitor to run
slowly or not operate properly. Install the devices correctly according to the appropriate manual and
set the network.
y Connection method may differ according to the AP manufacturer.
, you can watch the files stored on a device connected via Wi-Fi Direct.
/ Intel's WiDi
TM
and Intel's WiDi technologies on your Monitor.
TM
TM
/ Intel's WiDi to On, Wi-Fi Direct is
TM
/ Intel's WiDi function to Off, Wi-Fi Direct returns to the previous
SMART MONITOR FUNCTION
TM and Intel's WiDi is connected.
17