To set automatic standby
[This function is available on certain models or in certain countries only.]
SMART → SETTINGS → TIME → Automatic Standby
If you do not press any button on the monitor or remote control for a certain period, the monitor will
automatically switch to standby mode.
y This function does not work on Store Demo mode or while software update via network.
Lock
To set password
SMART → SETTINGS → LOCK → Set Password
Sets or changes monitor password.
y The initial password is set as 「 0000 」 .
To lock system
SMART → SETTINGS → LOCK → Lock System
Permits only specific external input.
Select the Lock System to On.
Input Block
Block the input sources.
Application
Lock the Application.
Lock
Magic Remote
* Magic Remote is Separate purchase items.
To register the Magic Remote
To use the Magic Remote, register it with your monitor first.
Register Magic Remote as follows before use.
1 Turn on the monitor and wait for about 10 seconds and then press Wheel(OK) button while pointing the
remote control at the monitor.
2 The remote control is automatically registered and the registration completion message appears on the
monitor screen.
y If you failed to register the Magic Remote, turn off the monitor and try again.
To re-register the Magic Remote
1 Press the
and
buttons together for about 5 seconds.
2 Press the Wheel (OK) button towards the monitor to re-register the Magic Remote.
y Press the
button and
y Press the
button while pointing the remote control at the monitor for five seconds to reset and re-
register it.
button at the same time, for five seconds, to reset the Magic Remote.
13
OPTION