Royal Sovereign NB-1900N Owner's Manual page 6

3.INSTRUCTION OF BUTTONS AND LED
1. Press power button to turn laminator on or off.
2. When you press power button, "FUNC 2"
NB-1900N
3. To choose film thickness, press
4. For cold laminating, press
5. When you choose any function, a blinking LED light
TEMP
6. When blinking stops, a buzzer will ring once every
COLD
7. Even if you turn off as soon as finishing laminating,
ON/OFF
LED is blinking. At this time, function buttons
become available.
and you will see the LED read-out.
LED will light up.
means it's not ready. When the blinking stops, the
laminator is ready.
two minutes.
rollers will continue to turn until cooled down properly,
and then stop.
COLD then green
6
NB-1900N
or