Royal Sovereign RBC-1003BK Owner's Manual page 8

Common and Batch Counting Modes
The machine is preset to common counting mode, which automatically counts all bills placed into the hopper. To count bills
in batches, press BATCH. Batching is preset to 100 bills. To change batch amount, press C to clear, and use the keypad to
enter a batch number between 1 and 999. Press SET to save the setting.
Add Mode
The ADD mode displays cumulative total of all bills counted. To turn ADD mode on, press ADD.
Memory Settings
The machine will save counterfeit detection and counting mode settings when power is turned off and on.
The machine will save counterfeit detection settings, manual, and add mode settings when power is turned off and on.
Bill Counting Mode
This machine is preset to stop counting when a counterfeit or irregular bill is detected and include these bills in the master
count (shown on the count display). This preset setting is type 2, which can be accessed by pressing SET twice (preset
display will show "F" and count display will show "2"). This setting is ideal for a user who does not require counterfeit
detection and is sitting nearby to push RESTART as necessary.
This preset counting mode may be changed to:
1. no t count counterfeit or irregular bills and stop counting to allow removal of bill(s) in question, and allow re-insertion of
all bills into hopper to restart counting from zero. To set counting mode to this type, press SET twice. Preset display will
show "F". Use the keypad to select "1", then press SET to save the setting. This setting is ideal for a user who requires
counterfeit bills be excluded from the master count.
2. co u nt counterfeit or irregular bills and continue counting, unless there is a jam error (either EA2, two or more bills
counted as one, or EA3, part of one bill overlapping another bill), in which case the count may be inaccurate. In this
case, bill(s) in question are counted, and the machine will stop to allow re-insertion of all bills into hopper to restart
counting from zero. To set counting mode to this type, press SET twice. Preset display will show "F". Use the keypad to
select "3", then press SET to save the setting. This setting is ideal for a user who does not require counterfeit detection
and is requires fully automated, hands-free counting.
8