Water Outlet - Brandt DFS1010W Installation Instruction

How to Drain Excess Water From Hoses
If the sink is 1000 higher from the floor, the excess water in hoses cann ot be drained dire ctly
into the sink. It will be necessary to drain excess w ater from hoses into a bo wl o r suitable
containe r that is held outside and lower th an the sink.

Water Outlet

Connect the water drain hose. The drain hose mu st be correct ly fitted to avoid water lea ks.
Ensure that the w ater dra in hose is no t kin ked or squashed.
Extension Hose
If you need a drain hose extension, make sure to use a sim ilar drain hose.
It must be no longer than 4 metres; otherw ise the cleaning effect of the dishwasher coul d be reduced .
Syphon Connection
The distance betwe en the d rain con nect ion and the b otto m o f the app lian ce m ust n ot be longer than 1000m m.
The wa ter drain hose sh ould be fixed.
The following things should be checked before starting the dishwasher.
1
The dishwasher is
2
The inlet valve is open
3
Fill hose connections are fully tightened and not leaking
4
The wires are tightly connected
5
The power is switched on
6
The inlet and drain hoses are knotted
7
All packing materials and printings have been removed from the dishwasher.
levelled
and fixed properly
After installation, please make sure to keep this manual.
The content of this manual is very helpful to the users.