Switching Off The Dishwasher; Unloading The Dishwasher - Brandt DFS1010W Installation Instruction

When you press the Start/Pause button to pause during washing, the
stop blinking and the dishwasher will mooing every minute unless you press the
Start/Pause button to start.
Changing the Program Mid-Cycle
Premise:
running cycle can only be changed if it has only been
1 A
detergent may have already be en released, a nd the appliance may have already drained the wash water.
If this is the case , the detergent dispenser must be refilled (see the section entitled " Loading the
Detergent " ).
2 Press the Start/Pause button , the machine will pause, press the pro gram button more than 3s then you
can change the program to the desired cycle setting (s ee the section entitled " Starting a wash cycle. . ." ).
If you open the door
stop blinking and the buzzer will mooing every minute unless you close the door . After
you close the door ,the machine will keep on working after 10 seconds.
If your model has broken remember function, the machine will go on to finish the selected
program
A forgotten dish can be added any time before the detergent cup opens.
1
Press the Start/Pause Button to stop the washing.
2
Open the door a little .
3
After the spray arms stop working, you can open the door
completely.
When the wo rking cycle has finished, the buzzer of the dishwasher will soun d for 8 seconds, then stop. Turn off
the appliance using the O N/O FF button, shut off the wa ter supp ly and open the door of the dishw ashe r.
Wait for a few minutes before unlo ading th e dishwasher to avoid ha ndlin g the dishes and utensils while th ey
are still hot and m ore susceptible to break . They will also dry be tter.

Switching Off the Dishwasher

The program light is on but is not blinking,
1.Switch off the dishwasher by pressing the On/Off Button.
2.Turn off the water tap!
Open the door carefully.
Hot dishes are sensitive
the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.

Unloading the dishwasher

It is normal for the dishwasher to be wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
It is dangerous to open the door mid-cycle,
as hot steam may scald you.
during a wash cycle
after the power cut .
only in this case has the program en ded.
shocks . The dishes should c ool down for around 15
running for a short time. Otherwise, the
, the machine will pause. The program light will
Add forgotten dishes.
4
5
Close the door
6 Press t he Start/Pau se B utto n. The d ishwasher w ill ru n
after 1 0 se cond s.
minutes before removing from
running indicator will