Please refer to the Remote Diagnostic Manager (RDM) User's Guide for more
information on remote diagnostic configuration.
The following is the first of two Remote Diagnostic Configuration screens in the
BIOS utility.
settings:
Remote Diagnostic Configuration
RDM 4.0 BIOS Version ...................980702
Remote Console .........................[Disabled]
Hidden Partition .......................[Disabled]
Communication Protocol ..............[ N, 8, 1 ]
COM Port Baud Rate ..................[57600]
Telephone Type ......................[ Tone ]
Detect Tone .......................[Enabled]
Remote Console Phone No. ...............[----]
Dial Out Retry Times ...................[ 2 ]
Modem Initial Command. .................[----]
= Move Highlight Bar,
It shows the remote diagnostic parameters with their default
Page 1/2
= Change Setting, F1 = Help