Acer Altos 1100 Series User Manual page 55

To configure the first floppy drive (drive A), highlight the Floppy Drive A
parameter. Press
value.
Possible settings for the Floppy Drive parameters:
[
[360 KB,
[1.2 MB,
[720 KB,
[1.44 MB,
[2.88 MB,
Follow the same procedure to configure floppy drive B. Choose None if you do
not have a second floppy drive.
There are four IDE drive option items under the Disk Drives menu. Select the
IDE Primary Channel Master item (or the IDE Secondary Channel Master) if you
want to configure an IDE device set as master. Select the IDE Primary Channel
or key to view the options, then select the appropriate
None ]
5.25-inch]
5.25-inch]
3.5-inch]
3.5-inch]
3.5-inch]