Rowenta DX1900 Instructions Manual

Rowenta steam iron instructions.
Hide thumbs

   Related Manuals for Rowenta DX1900

   Summary of Contents for Rowenta DX1900

  • Page 2

    Use caution when you turn a steam iron upside down there may be hot water in the reservoir. • The use of accessory attachments is not recommended by Rowenta Appliance Company and may result infire, electric shock or personal injury.

  • Page 3: Before Use, Filling With Water

    They are not harmful and sould disppear after the iron has been alowed. - If the iron is not moved while it isplugged in, an internal safety switch will turn it off. - It will turn off in 8 minutes if left vertically or in 30 seconds if left on its soleplate or tipped over.

  • Page 4

    Water Recommendations Tap water Rowenta irons are designed to be used with REGULAR TAP WATER (up to 12 grains of hardness). If your water is harder than this, Rowenta recommends mixing half tap water with half distilled water which reduces the hardness; or just use inexpensive bottled spring water.

  • Page 5: Steam Ironing, Dry Ironing

    • Never iron or steam clothes while they are being worn. • Before ironing for the first time fill iron and allow to heat. • The iron should be allowed to emit steam for 1 to 2 minutes while pressing the burst of steam button a few times to remove any impurities.

  • Page 6: Spray Setting, Anti-drip System

    Take all proper precautions and hold iron away from body. - Move the iron gently back and forth and side to side until all water has run through plate. - Carfully wipe all water and material from the soleplate with an old towel, as the water and minerals can stain the sole- plate (although this has no effect on glide of performance).

  • Page 7: After Ironing, Cleaning And Maintenance

    - In normal use a draggy coating may build up on the soleplate (starch, detergent build-up, burnt synthetic fibers). This can easily removed by using the Rowenta Soleplate Kit or a quality hot iron soleplate cleaner available at most stores. The Rowenta kit is also available through our website:

  • Page 8: Troubleshooting

    Solutions Check that iron is plugged correctly. Set the temperature control to a higher temperature. Move iron or shake it gently to reactivate. Fill the water tank. See section called “Steam Ironing” . Wait for the soleplate to reach the correct temperature.

  • Page 9

    In the interest of improving products, Rowenta reserves theright to change specifications without prior notice. All Rowenta products are warranted for 1 year from date of purchase against defects in material and workmanship. During this period, any Rowenta product that, upon...

  • Page 10

    If your appliance needs service, ship the product to your nearest regional service center. Be sure to put your name on the outsede of shipping box (no P .O. boxes please). If in warranty, Rowenta will repair or replace product at their discretion. If the product is out of warrantyn you will be advised of the cost of repair before any work begins.

Comments to this Manuals

Symbols: 0
Latest comments:
  • DIANE Paganelli Jan 15, 2017 04:41:
    Can you turn the (Dx1900) completely OFF while plugged in ????