Risco iREX Installation Instructions

with the IQ feature
INSTALLATION INSTRUCTIONS
DESCRIPTION
iREX and iREX Plus are PIR detectors specifically designed for request-to-exit (REX) and request-to-enter (REN) applications.
The iREX detectors are designed with the IQ feature (Intelligent Queuing) used to
The iREX detectors can be installed as stand alone units or in conjunction with Access Control systems.
The iREX can be mounted on both walls and ceilings and are designed with flexible adjustment to cover the specific needs of each secured area.
1. INSTALLATION
iREX Components:
Adjusting Buzzer Volume:
Masking:
To insert a masking wedge:
To remove a masking wedge:
.
remotely enable or disable the iREX
IMPORTANT:
The iREX should always be installed with the rounded
side of the detector pointing to your left side when you
are facing the iREX.
2
1
Masking Coverage:
2. MOUNTING AND DETECTION
Wall Mounting 2.3m Ceiling Mounting 2.3m
Position 0 Position 0
Wall Mounting 2.3m
Position A
A
Wall Mounting 4.6m Ceiling Mounting 4.6m
Position 0 Position 0
0
Front View
C C
X X X X
4.7m
15.4ft
Top View
Wall Door Wall
X
Side View
Wall
4.6m
(15ft)
4m
(13.2ft)
3m
(9.9ft)
2m
(6.6ft)
1m
(3.3ft)
0m
(0ft)
1.2m
3.9ft
Wall Mounting 2.3m
Position B
B
Side View
Wall
2.3m
(7.5ft)
2m
(6.6ft)
Door
1m
(3.3ft)
0m
(0ft)
2.4m
7.9ft