NEC Express 5800 Series User Manual page 44

=> ctrl all show
Because this target consists of several devices, the output will be brief. A typical output would be:
HPE Smart Array P408i-a SR Gen10 in Slot 0 (Embedded) (sn: PEYHC0XRH570YT)
HPE Smart Array P408e-p SR Gen10 in Slot 1 (sn: HSJ08SW3JCUSXZ)
Example 3:
=> ctrl slot=0 show config
The output in this case will have detailed information because the target consists of only one device. A typical
output would be:
HPE Smart Array P408i-a SR Gen10 in Slot 0 (Embedded) (sn: PEYHC0XRH570YT)
Port Name: 1I (Mixed)
Port Name: 2I (Mixed)
Internal Drive Cage at Port 1I, Box 1, OK
Array A (SAS, Unused Space: 1805299 MB)
logicaldrive 1 (100.0 GB, RAID 0, OK)
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS HDD, 2 TB, OK)
Array B (SATA, Unused Space: 0 MB)
logicaldrive 2 (5.5 TB, RAID 0, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA HDD, 6 TB, OK)
Unassigned
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA HDD, 6 TB, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA HDD, 6 TB, OK)
SEP (Vendor ID HPE, Model Smart Adapter) 379 (WWID: 50014380409FB1D0, Port: Unknown)
Displaying the current versions of the application layers
The version command displays the current versions of the application and other software layers.
Syntax:
version
Example command:
version
A typical output would be:
SSACLI CLI Version: X.XX.X.X
SoulAPI Version: X.X.XX.X
The help command
To get help with the CLI, enter help at the CLI prompt, and then enter one or more help items, as follows:
=> help <item1> [item2] [item3]
A help item can be any of the following:

A CLI command
SSA CLI 44