Motorola H710 Quick Start Manual

BEFORE YOU
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H710 Headset.
Multi-Color
Indicator Light
Volume
Buttons
4
TEST AND USE
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Your phone and headset are now paired and
Schaumburg, IL 60196
ready to make and receive calls. To confirm they
are operating properly, make a call:
www.hellomoto.com
1-877-MOTOBLU 1
Place the headset over your ear.
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
2 On the phone, dial the number you want to
call and press SEND key on your phone.
Guide Number: 680xxxxAxx-O
If your phone and headset are successfully
3
Bluetooth ID: xxxxxxx
paired, you will hear ringing on the headset.
After you have successfully paired your phone
and headset, you don't need to repeat these
MOTOROLA and the Stylized M Logo are registered in the US
steps. For daily use, ensure that your headset is
Patent & Trademark Office. The use of wireless devices and their
turned ON and that your phone's Bluetooth
accessories may be prohibited or restricted in certain areas.
feature is ON.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
To save battery power, turn OFF the headset
proprietor and used by Motorola, Inc. under license. All other
when you don't use it for an extended time by
product or service names are the property of their respective
closing the boom.
owners.
© Motorola, Inc. 2007.
1
CHARGE YOUR
BEGIN
HEADSET
Charge your headset's battery for 2 hours:
Boom
1 Plug the Motorola charger into the end of
Microphone
the headset.
The indicator light turns red when the
battery is charging. It may take up to 1
minute for the indicator light to turn on.
When the headset's battery is fully charged
Call
(about 2 hours), the indicator light turns
Button
Speaker
green.
(on reverse
side)
2 Disconnect the charger.
Note: Headset is not functional while charging.
USING A SECOND PHONE?
Your headset allows a simultaneous, multipoint
connection to two Bluetooth phones.
To pair a second phone to your headset, follow
these steps:
1 Turn off any phones already paired with your
headset.
2
Turn off your headset by closing the headset
boom.
3
Perform Step 2 ("Start Bluetooth Feature"),
Step 3 ("Pair"), and Step 4 ("Test and Use")
to pair your headset with your second
phone.
4 To connect to both phones, turn on first
phone.
5 Close the headset boom and then re-open
it. The headset automatically connects to
both phones.
3
2
START BLUETOOTH
FEATURE
Your Headset and Phone
Your Phone
Before you can use your headset, you must pair
Your phone's Bluetooth feature is off by default.
(link) it with your phone.
To use your headset, you must turn on the
Bluetooth feature in your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
For most Motorola phones (at the main menu):
Menu > Settings > Connection >
1 Power on headset by opening the headset
Press M ( )
boom to initiate easy pairing. After a few
Bluetooth Link > Setup.
moments, the indicator light will be steadily lit
in blue to indicate headset is in pairing mode.
2
Scroll to Power.
3
Select Change.
Indicator Light
4
Scroll to On.
(steadily blue
for pairing mode)
5
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
If the headset does not enter pairing mode,
Note: These steps are for most Motorola phones.
see TROUBLESHOOTING for help.
For other phones, see your phone's user's guide.
TIPS FOR USING HEADSET USING YOUR H710
WITH TWO PHONES
Functions Guide
Use the following tips when operating the
on the reverse side
headset while connected to two phones:
for information on
The most recently paired device connected using your H710
●
to the headset is labeled the primary phone
(the other phone is labeled the Secondary
phone).
Incoming calls can be answered from both
●
phones. When answering a call, the idle
phone is disconnected from the headset.
When the call ends, connection to idle phone
is automatically reestablished.
Voice dial calls can be made from either
●
phone. Use different key actions to select
which phone to make a voice dial call (see
"Making Calls" for details).
Redialing a last call dials the number on the
●
phone with the last outgoing call.
PAIR
PAIR
CONTINUED
Your Headset and Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
1
On your Motorola phone, press
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
2
Select Motorola H710.
3 Select OK or Yes to pair your headset with
your phone.
4
Enter the passkey: 0000
5
Select OK.
When your headset successfully pairs with
your phone, the indicator light flashes purple
and blue.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
TROUBLESHOOTING
My headset will not enter pairing mode.
See
Make sure that any devices previously paired with
Features and
the headset are turned off. If the indicator light is
flashing in blue, first turn off the other device,
then close and reopen the headset boom. The
indicator light becomes steadily lit in blue
indicating the headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step
pair your phone and headset again (see step
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com//Bluetoothsupport
Menu >
M ( )
3 ).
2 ).
2 ) and
).
3