Headset makes connectivity invisible and reliable. It is astonishingly advanced and simple to use. Bluetooth Motorola is actively creating solutions for work, play, home, and life everywhere around the globe. Bluetooth Thank you for choosing the Motorola H70 Bluetooth Headset with technology!
Always obey the laws and regulations on the use of these products. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license.All other product or service names are the property of their respective owners.
Contents BEFORE YOU BEGIN ① CHARGE Your Headset's Battery ② START BLUETOOTH FEATURE Your Phone ③ PAIR Your Headset and Phone ④TEST AND USE USING A SECOND PHONE? TIPS FOR USING H70 WITH TWO PHONES TURNING HEADSET ON AND OFF WEARING THE HEADSET CHANGING FOR USE ON OTHER EAR CHANGING VOLUME BUTTON ORIENTATION...
BEFORE YOU BEGIN Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Take a moment before you get started to familiarize yourself with your new H70 Headset. Call Button Volume Multi-Color Buttons Indicator Light Boom Speaker Microphone...
Your Headset's Battery Charge your headset’s battery for 2 hours: Plug the Motorola charger into the end of the headset. The indicator light turns red when the battery is charging. It may take up to minute for the indicator light to turn on. When the headset’s battery is fully charged (about hours), the indicator light turns green.
4 Scroll to On. 5 Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the it off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
③ PAIR Your Headset and Phone Before you can use your headset, you must pair (link) it with your phone. Step A - ENSURE HEADSET IS IN PAIRING MODE Open the headset boom to power on the headset and initiate pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode.
3 Select OK or Yes to pair your headset with your phone. 4 Enter the passkey: 0000 5 Select OK. When your headset successfully pairs with your phone, the indicator light flashes purple and blue. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
④ TEST AND USE Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: 1 Place the headset over your ear. 2 On the phone, dial the number you want to call and press SEND key on your phone.
To connect your headset with your first phone (and thus be connected to both phones), follow these steps: 1 Turn on first phone. 2 Use your first phone to connect to your headset. a On your Motorola phone, press (Menu) > Settings > Connection > Bluetooth Link > Audio Devices.
The phone lists Bluetooth devices it finds. b Select Motorola H710. c Select OK or Yes. Your headset is now connected to both phones. The last paired phone (your second phone) is now your primary phone for voice dial functionality.
TIPS FOR USING H710 WITH TWO PHONES Use the following tips when using H70’s multipoint technology: • Incoming calls can be answered from both phones: – When answering a call, the idle phone is disconnected from the headset. – When the call ends, the idle phone is automatically reconnected to the headset.
USING YOUR H710 IMPORTANT: Be sure to first follow this guide to complete initial setup of your H70...
TURNING HEADSET ON AND OFF To turn your headset on, open the headset boom. The indicator light flashes blue (if connected with a device) or is steadilly lit (if ready to be paired). To turn your headset off, close the headset boom. The indicator light will turn off.
CHANGING FOR USE ON OTHER EAR You can wear your H70 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear: 1 Open the headset boom, then open the earhook (90°...
CHANGING VOLUME BUTTON ORIENTATION You can also change the orientation of the volume buttons on your headset. 1 Close the boom to turn the headset off. 2 Press and hold down the desired “volume up” button and open the boom. Keep the button pressed until the indicator light flashes blue three times.
QUICK BATTERY CHECK When not in a call, open the boom to check your headset’s battery charge level by pressing and holding both Volume buttons. The indicator light displays charge status until you release the buttons. See below for details on indicator light and available talk time based on charge status.
MAKING CALLS Function Action Make a voice dial call Tap the Call button and speak the (Primary phone) name after the tone Make a voice dial call Tap the Call button and either Volume (Secondary phone) button and speak the name after the tone End a call Tap the Call button, and hear a...
Mute or unmute a call Tap both Volume buttons until you hear a mute tone Note: Your H710 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone’s user’s guide for more information.
AUDIO TONES Audio Tone Headset Status Ring tone Incoming call Short tone Phone network not available High to low tone End call Two short tones when Volume at minimum or pressing Volume button maximum during a call Ascending tone Mute enabled Low tone (repeated every Mute reminder seconds)
INDICATOR LIGHT With No Charger Plugged In Headset IndicatorOff Headset StatusPower off Power off Three blue flashes Powering on/off Steady blue Pairing mode Quick blue/purple flashes Pairing successful Quick blue flash Incoming/outgoing call on primary phone Slow blue pulse Connected (on a call) Slow blue flash Standby (not on a call) Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power,...
INDICATOR LIGHT CONTINUED With No Charger Plugged In Headset IndicatorRed Headset Status Red flash Idle (not connected to phone) Slow purple pulse Connected call muted Quick red flash Low battery Tip: Set your primary and secondary phones to different ring tones to know which phone is ringing when wearing the headset.
TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, first turn off the other device, then close and reopen the headset boom. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode.
My headset will not pair with my phone. Open the boom flip. Press and hold both Volume buttons and the Call button for more than 10 seconds. The indicator light flashes blue 3 times and then become steadily lit. The headset is now in pairing mode (see step B) to complete the pairing process.
SUPPORT If you need more help, contact us at - 877-MOTOBLU or visit us at www.hellomoto.com/Bluetoothsupport Bluetooth QD ID: B0079 Motorola, Inc. Consumer Advocacy Office 07 East Algonquin Road Schaumburg, IL 09 www.hellomoto.com -877-MOTOBLU -888-90- (TTY/TDD United States for hearing impaired)
080 0 0 9 Turkey 0 7 9 This symbol on a Motorola product means the product should not be disposed of with household waste. Please do not dispose of mobile telephones or electrical accessories, such as chargers or headsets, with your household...
European Union Directives Conformance Statement Hereby, Motorola declares that this product is in compliance with: The essential requirements and other relevant provisions of Directive 999//EC. All other relevant EU Directives. Product Approval Number The above gives an example of a typical Product Approval Number.