motorola
H710
Quick Start Guide
1
CHARGE
Your Headset's Battery
Charge your headset's battery for 2 hours:
1
Plug the Motorola charger into the end of
the headset.
The indicator light turns red when the battery
is charging. It may take up to 1 minute for
the indicator light to turn on. When the
headset's battery is fully charged (about 2
hours), the indicator light turns green.
2
Disconnect the charger.
Note: Headset is not functional while charging.
Note: This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.
BEFORE YOU
BEGIN
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H710 Headset.
Volume
Buttons
Speaker
(on reverse
side)
2
START BLUETOOTH
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
M
1
Menu
> Settings > Connection >
Press
(
)
Bluetooth Link > Setup.
2
Scroll to Power.
3
Select Change.
4
Scroll to On.
5
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn it off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
Call
Button
Multi-Color
Indicator Light
Boom
Microphone
(on reverse side)