Icom IC-A14 Quick Operation Manual page 2

• WEATHER ( ), ON or OFF
WX
Push then push [4 ] to
func
func WX-ALT
turn weather alert ON or OFF
– If you are experiencing an interruption every 5
seconds, turn your weather alert OFF, the "
WX
symbol will disappear from the screen
• LOCK, ON or OFF ( )
3
Push the KEY LOCK switch [key1] to turn ON
Push and hold switch 2 seconds to turn OFF
• SCAN, ON or OFF
Push then push [2 ]
func
func SCAN
Push [Y ] or [ Z] to change the scan direction
To stop scan, push [CLR]. To resume, push
[CLR] [2 ]
func func SCAN
• MEMORY SCAN
Push [MR
] to enter memory mode
MW
Push , then push [2 ]
func func SCAN
– T o stop scanning, push [CLR]
• CLEAR ALL
Push [CLR] twice
PROGRAM FREQuENCIES INTO MEMORY
• SELECT THE DESIRED FREQUENCY
Push [CLR], then select the desired frequency by using
the keypad.
" Push
func func
– A large "M" will blink at the top on screen
Push [Y ] or [ Z] to select the channel
Push [ENT
SET
• ENTER BANK SELECTION MODE & SELECT A BANK
Push
func func
Push [Y ] or [ Z] to select the bank
Push [ENT
SET
• FINISH WRITING TO MEMORY
Now that the channel and bank have been selected,
push [ENT
SET
• FIND FREQUENCY IN MEMORY
Push [MR
MW
memory channels, pause at each channel and the frequency will
momentarily appear
then push [MR ]
MW
] to save
then push [3
]
BANK
] to save
] to save and end.
] and push [Y ] or [ Z] to scroll through the
TAG (SELECT SCAN) CHANNELS
TAG channels is Icom's way of selecting and deselecting
channels to be scanned
• TO TAG A MEMORY CHANNEL
Push [CLR] then select the desired frequency by using
the keypad
Push [MR ] to select the memory mode, if desired, then
MW
select the BANK.
Push then push [3
func func BANK
Push [Y ] or [ Z] to select the bank
Push then push [9
func func TAG
appears, and to cancel the TAG setting, repeat above steps
– A TAG symbol will appear when TAG is ON
– The TAG function is only available for scan operation
• HOW TO DELETE CHANNELS IN MEMORY
Push [MR
] to select memory mode
MW
Select the desired channel to delete
Push , then push and hold [CLR
func func
1 second
– The screen will read:
]
] the TAG symbol
] for
HOME