Table of Contents
Advertisement
Installation
method
8
Before installing...
– This model (PSF1032A) is designed to be installed outdoors and
supports day to day water proofing.
– To prevent the product from falling by wind or other external force, use
the bolt and nut of M8 or above.
– Be careful not to let other objects interfere with product from cooling
and also be careful not to block the inlet/outlet when installing the
product.
– Installing the product in an environment that exceeds the usable
temperature and humidity can cause unexpected issues. Therefore
always consult with LG Electronics before installing the product.
– Installing the product in locations where chemicals such as TCE series
or chlorine gas are used or locations where vibration is excessive can
cause unexpected issues. Therefore always consult with LG Electronics
before installing the product.
– When using the product in highly dusty area, the illumination can be
reduced due to the dust. Therefore periodically clean the product and
do not install the product where metallic dust is generated.
– Install at least 1m from the ground clearance distance must be
maintained.
– The mark means min. distance from PLS to lighted object when install
the PLS, check the distance from PLS on the optical axis of PLS.
3m
CAUTION
1. Follow regulations of government agency for technical standard and
electric power company's guide regarding regulations on equipment
and wiring.
•
WARNING
2. Do stated earth work when installing PLS
•
WARNING
By the regulation and this installation guide,
electric work using a specific circuit must be done
by certified electric technician. It can cause fire or
electric shock if capacity of power supply circuit is
insufficient or faulty.
Do earthwork of PLS. Do not connect earth wire
with gas pipe, water pipe, lightning rod or
telephone line. It can cause electric shock as it
makes earthwork incomplete.
Advertisement
Table of Contents
