Advertisement
Note: If pulse duration is not selected relay output defaults to 1 second.
Next select the time (military format) of holiday event should occur by depressing the number keys 0
through 9. Depress ENTER to accept. Display automatically scrolls to the next event number to be
programmed. You may continue to enter holiday events by repeating the previous steps or exit
programming by depressing ESCAPE.
Example: To program holiday event #2 to cause Relay 2 to Latch (Relay On) at 08:00 am depress the
following sequence of keys:
Note: Holiday events will always override any regularly scheduled events.
C.2 Setting Holiday Dates:
It is now necessary to assign these holiday events specific calendar dates which they are to occur. To set
holiday event dates depress HOLIDAY/YES once
Depress ENTER until the flashing cursor reaches the date display location. Next make your selection by
depressing the number keys 0 through 9. You may continue to add holiday event dates by repeating the
previous steps or exit programming by depressing ESCAPE.
Example: To program holiday events to occur on Dec. 25, 2000 depress the following sequence of keys:
You may continue to program the next holiday date or depress ESCAPE to exit.
D. Delete/Disable Events or Edit Events:
Previously programmed regularly scheduled and/or holiday events may be deleted/disabled without having to
erase all events. To proceed depress PROGRAM once. Locate the event number by depressing the number
keys 0 through 9. When cursor is flashing under
depressing UP you can scroll through all the events programmed. If any event needs to be modified or disabled
depress ENTER. Next, depress ENTER until flashing cursor reaches the RLY display location. Depress
DISABLE and RLY DIS will appear in display. Depress ENTER until the next event number appears to
accept modification. Repeat the previous steps above to locate and disable other events or depress ESCAPE
to exit.
.
Previously programmed regular and/or Holiday events may be edited by depressing PROGRAM once.
Locate the event number by depressing the number keys 0 through 9 or scroll using the UP key. Proceed
to make any changes (i.e. RL#, Day, Relay Event Type, Time) and depress ESCAPE to exit.
E. Delete All Events:
All previously programmed events can be deleted by simply depressing CLR MEM.
CLEAR ALL EVENTS? will appear in display. Accept by depressing YES followed by 1 to confirm
deletion.
HOL #0001 01/01/01
^
symbol in display, scrolling feature is activated. By
- 6
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
will appear in display.
Advertisement
