Advertisement
Example: To program 02/14/99 SU 10:25 am DS (daylight savings) depress the following sequence of keys:
To change or reprogram clock/calendar depress TIME and make new selections by repeating steps above.
B. Setting Events:
Depress PROGRAM once.
Depress ENTER until the flashing cursor reaches the RL01 display location. Select
the output relay (RLY1 through RLY4) desired by depressing 1 through 4.
Next, select the day of week by depressing SUN through SAT. If this event is to occur on only one
specific day, repeat the previous entry again.
Note: When it is required to have the same event repeated on two (2) or more consecutive days of the week
(Block Programming), enter the first day followed by the last day by depressing SUN through SAT.
Example:
1) Monday through Thursday depress MON followed by THURS.
2) Wednesday through Sunday depress WED followed SUN.
Next select type of event required:
Depress RLY OFF for Relay OFF (Latching Mode)
Depress RLY ON for Relay ON (Latching Mode)
Depress PULSE for Relay PLS (Pulse/Toggle Mode)
When selecting Pulse/Toggle Mode it is necessary to assign the length of time (duration) of relay activation.
The pulse can range in length from 1 second minimum to 15 seconds maximum by depressing the number
keys 0 through 9.
Note: If pulse duration is not selected relay output defaults to 1 second.
Next select the time (military format) of day(s) event should occur by depressing the number
keys 0 through 9. Depress ENTER to accept. Display automatically scrolls to the next event number to be
programmed. You may continue to enter events by repeating the previous steps or exit programming
by depressing ESCAPE.
Note: When programming additional events it is necessary to select the next consecutive event number
following the last event programmed to continue.
Example: To program event #1 to cause Relay 2 to Toggle/Pulse for five (5) seconds on both Sat. and Sun.
at 11:59 pm, depress the following sequence of keys:
C.1 Setting Holiday Events:
Depress PROGRAM once. Select the next available event number by depressing keys 0 through 9.
Depress ENTER until the flashing cursor reaches the RL01 display location. Select the output relay
(RLY01 through RLY04) desired by depressing 1 through 4. Next depress HOL-EVENT.
HL/HL will appear in the display designating this event as a holiday.
Next select type of event required:
Depress RLY OFF for Relay OFF (Latching Mode)
Depress RLY ON for Relay ON (Latching Mode)
Depress PULSE for Relay PLS (Pulse/Toggle Mode)
When selecting the Pulse/Toggle mode it is necessary to assign the length of time (duration) of relay
activation. The pulse can range in length from 1 second minimum to 15 seconds maximum by depressing the
number keys 0 through 9.
EVNT #0001^RL01 SU/SU
will appear in display.
RLY
00:00
- 5
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
DOWN
ENTER
Advertisement
