Lennox ComfortSense 7500 User Manual page 11

Setting Selection
fan
heat / cool (either heat pump, gas
or electric heating is selected)
cool only (option only appears if no
heating equipment is avail able or
configured)
humidity - Allows selection of
humidity mode which is humidifier
only, dehumidifier only or both
(humidifier + dehumidifier). (option
only available if equipment installed
and configured.)
reminders - Items on this list are by
default disabled.
Table 3. User Settings (General)
Function Description
See "Fan Operation" on page 6.
Heats home to desired tempera ture setting. Options are on
normal
or off.
If system is two-stage heating or cooling, then 2nd stage is
comfort
locked in until demand is satisfied.
Bypasses the first stage of heating (any stage[s] of heat pump
emergency
heating) and goes directly to the heat stage used for maximum
heat
heating to more quickly warm a very cold house.
Heating limit with a default of 0°F. Range is 45°F to 90°F
set point
range
Cooling limit with a default of 45°F. Range is 45°F to 99°F
set point
Cooling limit with a default of 45°F. Range is 45°F to 99°F
range
Options are ON and OFF. Allows humidity setting adjustment
humidify
between 15% to 45%. Default is 45%.
Options are ON and OFF. Allows dehumidify adjustment
dehumidify
setting between 45% to 60%. Default is 50%.
Media filter, humidity pad, routine system check up, UV lamp, metal insert for
PureAir and customer reminders 1 and 2*.
Options for each reminder are disabled (default), 3mon, 6mon, 12mon, 24mon
or a custom duration by specific date can be set. Once set an "expires on xx/
xx/xx (date) will be displayed next to the function.
*Custom reminders 1 or 2 may have been renamed by the installer.
11