Palmgren BF 46VARIO Operating Manual page 47

Interval Where?
Start of work,
after every
maintenance or
repair work
Every week
Every week
Version 1.1.4 dated 2015-3-30
What? How?

Actuate the central lubrication of the cross table and of the
drill-mill head with five pump strokes. If required refill acid-
free oil in the tank of the central lubrication.
Oiling

Oil all bare steel surfaces. Use an acid-free oil, e.g.
Oiling
weapon oil or motor oil.

Check the oil level of the gear. The oil level must be in the
middle of the sight glass.
Oil level
Original operating instructions
Filling hole
Fig.5-1: Central lubrication
Oil sight glass
Fig.5-2: Oil sight glass gear
BF46 Vario | BF46TC US
Page 47